Genie GR-26J, Руководство по обслуживанию

Страница: 63 / 119

Section 4 • Repair Procedures
Part No. 227656 GR-20J • GR-26J 4 - 17
September 2016
MAST COMPONENTS
18 Using Illustration 1 as a guide, tag and remove
the inner wear pads from the top of the number
3 mast section. Set the shims to the side.
Discard the wear pads.
Note: For ease of mast reassembly, make careful
note of the location, order and orientation of the
shims.
Note: Use a hammer and chisel if necessary to
gently loosen the wear pads from the mast.
19 Using Illustration 1 as a guide, tag and remove
the outer wear pads and shims from the bottom
of the number 2 mast section. Set the shims to
the side. Discard the wear pads.
Note: For ease of mast reassembly, make careful
note of the location, order and orientation of the
shims.
Note: Use a hammer and chisel if necessary to
gently loosen the wear pads from the mast.
20 Using Illustration 1 as a guide, tag and remove
the inner wear pads from the top of the number
2 mast section. Set the shims to the side.
Discard the wear pads.
Note: For ease of mast reassembly, make careful
note of the location, order and orientation of the
shims.
Note: Use a hammer and chisel if necessary to
gently loosen the wear pads from the mast.
21 Using Illustration 1 as a guide, tag and remove
the outer wear pads and shims from the bottom
of the number 1 mast section. Set the shims to
the side. Discard the wear pads.
Note: For ease of mast reassembly, make careful
note of the location, order and orientation of the
shims.
Note: Use a hammer and chisel if necessary to
gently loosen the wear pads from the mast.
22 Using Illustration 1 as a guide, tag and remove
the inner wear pads and shims from the top of
the number 1 mast section. Set the shims to the
side. Discard the wear pads.
Note: For ease of mast reassembly, make careful
note of the location, order and orientation of the
shims.
Note: Use a hammer and chisel if necessary to
gently loosen the wear pads from the mast.