background image

 
 

 

 

Miniexcavators – Undercarriages - Minidumpers – Skid Steer Loaders – Aerial Platforms 

 

 

ATTENTION: THIS BOOKLET DOESN'T SUBSTITUTE THE OPERATION AND MAINTENANCE 
MANUAL. IT’S NECESSARY TO READ CAREFULLY AND UNDERSTAND THE OPERATION AND 

MAINTENANCE MANUAL BEFORE CARRYING OUT ANY MANOEUVRE WITH THE MACHINE. 

 

QUICK INSTRUCTIONS FOR HINOWA LIGHTLIFT 1775 AND 2010 

PERFORMANCE 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Engine 

preheat 

button 

Emergency STOP 

button 

Gravity 

emergency 

descent 

Automatic 
outriggers 

retraction  

Left track 

1-2 arms 

Jib 

Turret 

rotation 

Right track 

3 arm 

Extension 

Basket 

leveling 

key 

Electric 

motor 

(start-stop) 

Thermic 

engine 

(start-stop) 

Undercarriage 

closing 

Automatic 

stabilization 

Undercarriage 

widening 

Engine speed 

selector 

Stabilizers manual 

operating 

Service 

menu 

selector 

Display 

Permission of aerial 

part operation from 

ground 

Basket 

rotation 

 

 

To start the machine with the thermic engine, the 
ignition switch should be turned ON and all the 
STOP buttons should be released. The battery 
cutter must be switched ON.    Thermic  engine  or 
electric motor must both be started by pressing 
the relevant buttons on the remote control (see 
picture above). 

BATTERY CUTTER 

 

FIPE1720021601

 

Содержание LIGHTLIFT 1775 PERFORMANCE

Страница 1: ...ck 1 2 arms Jib Turret rotation Right track 3 arm Extension Basket leveling key Electric motor start stop Thermic engine start stop Undercarriage closing Automatic stabilization Undercarriage widening Engine speed selector Stabilizers manual operating Service menu selector Display Permission of aerial part operation from ground Basket rotation To start the machine with the thermic engine the ignit...

Страница 2: ...l To open the jib arm press the jib movement joystick Jib should be closed to allow outriggers movements ALIGNMENT ARROWS TRACKS SPEED COULD BE LIMITATED BY AN AUTOMATIC SPEED CONTROL THAT PREVENT UNSAFE TRANSALTION CONDITIONS TRANSLATION WITH JIB OPENED IS POSSIBLE ONLY WHEN OPERATOR AT THE GROUND TRANSLATION WITH JIB CLOSED IS POSSIBLE FROM THE GROUND OR FROM THE BASKET JIB ARM OPENED MOVING THE...

Страница 3: ...the aerial part is closed and aligned keep pressed the yellow button number 1 on the remote control MOVING THE AERIAL PART Aerial part movements except for the jib arm are possible only when machine is stabilized and therefore when the MACHINE STABILIZED icon appears in position 5 of the display To move the aerial part the remote control must be positioned in its basket support If a stabilization ...

Страница 4: ... Software updates available Automatic periodical service reminder Inclination too high to drive safely Remove weight or remote control from basket Jib only possible movement RPM signal missing CAN BUS signal missing Board or software wrong Control error menu SELF DIAGNOSYS LIST OF POSSIBLE ERROR MESSAGES ON THE DISPLAY Cables sensor missing Only LL20 10 Lift outrigger from the ground Close aerial ...

Отзывы: