AUTOMATIC STABILIZATION:
To stabilize the machine automatically the
machine must be closed aligned (all the
arms and the jib closed and turret
aligned). Keeping pressed the green
button (number 7) on the remote control
the machine start the automatic
stabilization procedure. That procedure will
be completed only when the display shows
the MACHINE STABILIZED icon (see the
picture on the right). Stabilisation is the
necessary condition to allow aerial part
movements.
OK
MANUAL STABILIZATION:
It’s also possible to move the outriggers one at a time pressing the blue button
(number 2) and following the indications given on the display. Automatic
Stabilisation remain the recommended procedure.
AUTOMATIC OUTRIGGERS RETRACTION:
To bring back the platform in transportation configuration (all the outriggers
completely lifted), once that the aerial part is closed and aligned, keep pressed
the yellow button (number 1) on the remote control.
MOVING THE AERIAL PART
Aerial part movements (except for the jib arm) are possible only when machine
is stabilized and therefore when the MACHINE STABILIZED icon appears in
position 5 of the display. To move the aerial part the remote control must be
positioned in its basket support. If a stabilization condition is missing, when a
joystick is moved the display indicates the missing condition with NO as
follows.
•
ST “n”: if “NO” indicates that the outrigger “n”
is not touching the ground
•
INCL: if “NO” indicates that the machine is not
properly leveled
•
LOAD: if “NO” indicates that the weight in the
basket exceeds the 230 kg
•
BASKET: if “NO” indicates that the remote
control is not properly positioned in its basket
support
•
PEDAL (optional): if “NO” indicates that pedal
has to be pressed to allow the aerial part
movements
•
AUTOST: if “NO” indicates that automatic
stabilization procedure was not properly
completed
STABILIZATION CONDITION MISSING
