Genesis GEN3t, Руководство пользователя

Страница: 8 / 1124

10.4.4 Interval timer 147
10.4.4.1 Interval timer - Less 147
10.4.4.2 Interval timer - More 148
10.4.4.3 Interval timer - Between 149
10.4.4.4 Interval timer - NotBetween 150
10.4.5 Event counter 151
10.5 Recorder and system trigger 152
10.6 Channel alarm 154
11 Interface/Controller 155
11.1 Introduction 155
11.2 Communication and control 156
11.2.1 Network protocols and ports 157
11.2.2 Using the 1 Gbit option connections 158
11.3 Master/Slave Synchronization 159
11.3.1 Connecting the Master/Slave Synchronization connector 163
11.3.2 Connecting multiple mainframes using the Master/Slave card 163
11.3.3 Setting the Master/Slave operating modes 166
11.3.4 Setting the Master/Slave trigger 168
11.3.5 Synchronizing a Master/Slave setup to external time sources 171
11.4 I/O connector 172
11.4.1 I/O connector input overvoltage protection 173
11.4.2 I/O connector functions and connector pinning 174
11.5 Network Attached Storage (NAS) using iSCSI 178
11.5.1 Introduction: iSCSI NAS with GEN DAQ network 178
11.5.2 TCP/IP connection to a NAS 179
11.5.3 External Storage Setup dialog - Perception 179
11.5.4 GEN Data acquisition system 180
11.5.5 iSCSI Host 181
11.5.6 iSCSI Target 181
11.5.7 Target Name (IQN) 182
11.5.8 What is CHAP? 182
11.5.9 How to format the iSCSI 184
11.5.10 Status messages/ troubleshooting 184
11.5.11 Set up an iSCSI NAS connected through an Ethernet switch 185
11.5.12 Set up an iSCSI NAS connected without an Ethernet switch 189
11.5.13 Set up an iSCSI NAS connected to a corporate network – Basic setup 193
11.5.14 Set up an iSCSI NAS connected to a corporate network – Advanced setup 197
GEN3t
8 I3995-3.1 en HBM: public