Genesis GEN3t, Руководство пользователя

Страница: 169 / 1124

Figure 11.9: Perception work area with Master/Slave trigger
A Settings tab
B Trigger group
C Master/Slave trigger column
To set the Master/Slave trigger in the Perception software, proceed as follows:
1 Select the Settings sheet.
2 If it is not already done, switch the Settings sheet layout modes to
Advanced mode.
3 In the Settings sheet, go to the Trigger group in the task pane and select
Recorder .
A list of available recorders is displayed in the settings area.
4 Select the recorder that you want to set.
5
Double
-
click on the Master/Slave trigger cell to open it for modification.
GEN3t
I3995-3.1 en HBM: public 169