Generex CS141 Series Скачать руководство пользователя страница 93 | Manualshive

Страница: 93 / 110

background image

Date: 2021-08-17

Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved

TEL +49(40)22692910 - EMAIL [email protected] - WEB www.generex.de (This and all other product datasheets are available for download.)

93

Note:

The UPS Event Recorder polls the current list from the UPS with each call - These log data will not be cached or saved by
CS141.

Tools

For this configuration step, navigate to the following menu:

Reboot

Due to the fact the CS141 accept changes inside the configuration and start or restarts the
corresponding system services in real time, a complete restart is an exceptional situation. In
case of a restart of the CS141, UPS continues its normal mode: A reboot of CS141 does not
affect the UPS. To prevent an accidental triggered reboot, this feature was deliberately
placed inside

Tools

.

Tracer

The Tracer is a comprehensive diagnostic tool for verifying
communication between the CS141 and the connected devices as
well as for identifying network problems.

Under Device communication information about external devices
connected to CS141 can be queried. To track a device, open the

context menu and select the device you want to monitor. As the screenshot illustrates, the CS141 provides COM 1 / UPS, COM
2 / GSM modem and COM 3 / AUX-Port:

COM 1/ UPS

The tracer will screen the current communication running at the serial RS232 port. Faults or faulty communication are displayed
in real time and can be saved for later evaluation

COM 2 / GSM-Modem

The Tracer queries the communication between the CS141 and the GSM modem and displays the telemetry in real time. Errors
and communication problems can be easily collected and saved for later analysis.

COM 3 / AUX

A CON_AUX4 or CON_R_AUX4 can be connected via the AUX port. The tracer can interrogate communication with the device
in real time.

Note:

                                                     The Tracer adapts itself to the choice met under Devices in the configured in general port
                                                     settings. If sensors or a Sensor manager 2 is configured instead of a GSM modem, the tracer
                                                     will show these devices.

«
...
91
92
93
94
95
...
»

Содержание CS141 Series















































































































Отзывы:

Нет отзывов

Похожие инструкции для CS141 Series

Бренд: Qlogic Страницы: 2

SANblade 2300 Series

Бренд: Qlogic Страницы: 108

Бренд: Qlogic Страницы: 2

Бренд: Qlogic Страницы: 2

SANblade QLA2342

Бренд: Qlogic Страницы: 16

SANblade QLA4050

Бренд: Qlogic Страницы: 4

harman/kardon CITATION ADAPT

Бренд: Harman Страницы: 31

Бренд: ConvaTec Страницы: 4

MULTIflex LED coupling 460 LED

Бренд: KaVo Страницы: 28

Бренд: Dynex Страницы: 23

Бренд: Greenlee Страницы: 36

Бренд: Axial Страницы: 6

Бренд: Keysight Technologies Страницы: 24

USB ADAPTER PLUS

Бренд: KROHNE Страницы: 16

Бренд: Zonet Страницы: 32

Бренд: Linksys Страницы: 68

Бренд: Acer Страницы: 11

Бренд: Acer Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды