Date: 2021-08-17
Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL [email protected] - WEB www.generex.de (This and all other product datasheets are available for download.)
53
These are the icons the CS141 provides:
➔
Open /close tables
➔
Edit an existing job
➔
Test an existing job
Symbols providing two functions:
➔
delete
➔
Checkbox to select multiple jobs or events
➔
Add a job
Note:
Dual function symbols have two different meanings:
Depending on where you serve them, they refer to ALL events or to a specific event or job. This dual functionality allows you to
add a specific event to specific or all system events without the need of entering each job individually.
Setting up a job
Managing jobs for a system event always follows the same rules - as an example, the following system events are selected:
Select
>
to open the job table:
For the event Power failure, a total of 3 jobs are already configured. These jobs were loaded as a recommended default
configuration when selecting a UPS. To change or remove, just click on the corresponding icon..
The CS141 allows to delete all jobs within a system
event:
By doing so, activate the checkbox in the line for
power failure and press the symbol for deleting
events. After pressing all jobs associated with this one event will be deleted from the list.
Note:
Deleted jobs can not be retrieved, they must be recreated or restored by using a backup.To prevent accidental deletion,
administrators will be prompted to confirm their decission to delete alle entries inside an event...
To add a job to the power failure event, press + at the event line. This will trigger the configuration dialog who will guide you
through configuration process.
