Date: 2021-08-17
Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL [email protected] - WEB www.generex.de (This and all other product datasheets are available for download.)
67
Removing the terminal strips
Take a suitable tool and detach the green terminal strip from the base. Afterwards, the strip can simply be removed from the
back of the unit. The green terminal strips are pre-coded, so inadvertently inserting them incorrectly is basically impossible.
You can either use the plug-in contacts or the terminal strip for your installation.
Connecting devices
Please note that the upper and lower row of connections are assigned
differently:
The upper connections are marked IN 1 - IN 64 and are the digital inputs.
The lower row is and - and are optionally the reference point as
well as an internal power source should external sensors require an
operating voltage.
The connections are assigned as follows:
N 1 is opposite the positive pole on the other side.
IN 2 is opposite the negative pole on the other side.
[...]
IN 54 sits on the other side opposite a negative pole
IN 55 is opposite a positive pole on the other side.
When connecting contacts or devices, please note:
-
A relay with its own power supply is placed from the negative pole to the digital input.
Which negative pole you ultimately use for the connection is irrelevant- only the digital input must be able to detect an
open or closed contact. The digital input just needs a negative pole to be connected to and will be configured within
the configuration interface.
-
A sensor or switching unit with power supply with an operating voltage of up to 12:
In this case, you can tap the required power supply from the lower bar from the plus and minus poles via plugs or
terminals. The digital output of the sensor or the switching unit is then connected to the corresponding digital input on
the SITEMONITOR.
Note:
The upper connection bar offers 64 digital inputs that can be freely assigned. The lower bar offers 32 plus and 32 minus poles,
which can deliver a total power of 12 V / 1A. When counting, the odd designation of the digital input is always opposite the
positive pole and the even designation of the digital input is opposite the negative pole.
Configuration: Specific devices for the SITEMONITOR 6
For this configuration step, open the following menu:
