X
GEM-P3200 Programming Instructions
L
NAPCO Security Systems
WI818D 08/00
!
Page 52
SYSTEM OPTIONS (ADDRESS 2420-2422, 3874 & 3879-3881)
[Default = blank (•) blank (•)]
ADDRESS 2420
LEFT DIGIT (SUM
OF DATA VALUES)
RIGHT DIGIT (SUM
OF DATA VALUES)
SYSTEM OPTIONS
Disable Keypad
Instant Button
Enable
Line-Fault Test
Disable AC Fail Detection
Telco Fail
only when Armed
[Default = blank (•) blank (•)]
ADDRESS 2421
LEFT DIGIT (SUM
OF DATA VALUES)
RIGHT DIGIT (SUM
OF DATA VALUES)
RIGHT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
SYSTEM OPTIONS
Automatic
Interior Bypass *
Veri-phone Zones trip
Aux. Relay
Veri-phone Zones Priority
over Alarms
Aux. Output Chirp on
Keyfob Arming
LEFT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
SYSTEM OPTIONS
Don’t Clear Aux. Relay
with Arm/Disarm
Telco Answering
Service Overide
Disable Auto Status
Veri-phone Zones
trip Fire Output
*
Note:
If “Automatic Interior Bypass” in
Address 2421 is selected, then “Interior 1
Normally Bypassed” in Address 2419 must
also be selected.
!
1. Select the desired option by circling
"
the data values for each digit (left and right).
!
2. Add the data values (ex: 15=1+2+4+8) from the selected options.
!
3. Enter in address location (left and right digits).
NOTE:
Dark shaded data value box shows option not available.
Sy
stem Options
LEFT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
RIGHT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
SYSTEM OPTIONS
Disable System Trouble
Audible at Keypad
Chime on
E4 Lug
Disable Code required
for Func. Mode Lvl. 1
Disable Code required
for Easy Bypass
[Default = blank (•) blank (•)]
ADDRESS 2422
LEFT DIGIT (SUM
OF DATA VALUES)
RIGHT DIGIT (SUM
OF DATA VALUES)
RIGHT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
SYSTEM OPTIONS
Fire Output Cadence
Wireless Smoke
Low Battery Resound
Supervised
Alarm Output
Enable Smoke Detector
Dirty Trouble
LEFT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
SYSTEM OPTIONS
Disable Area Entry Relays
Disable Exit/Entry Urgency
Tone at Keypad
Enable Burg. Output for
Keyfob Chirp
Enable Burg. Output on Telco
Fail only when Armed
[Default = blank (•) blank (•)]
ADDRESS 3874
LEFT DIGIT (SUM
OF DATA VALUES)
RIGHT DIGIT (SUM
OF DATA VALUES)
RIGHT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
SYSTEM OPTIONS
Enable GEM-PRINT
Cancel Report
to Telco 3
Report Wireless Trouble
to Telco 1
Report Wireless Trouble
to Telco 3
LEFT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
SYSTEM OPTIONS
Enable Set Time/Date
RESERVED
Enable
Time/Date Display
RESERVED
[Default = blank (•) blank (•) from address 3879-3881]
ADDRESS
3879-3881
LEFT
ADDR
RIGHT
blank (•)
3879
blank (•)
3880
blank (•)
3881
ALARM/TROUBLE
REPORTING CODES
Wireless Low Battery
Wireless Supervisory
Wireless Tamper
