L
NAPCO Security Systems
X
GEM-P3200 Programming Instructions
WI818D 8/00
!
Page 21
Enter Date
(Press the
(
A
)
button to set cursor.)
Enter the current date in the format MM/DD/YY, where MM = the month
(01–12); DD=the day (01–31); and YY=the year. Press
J
to save. Press
NEXT (
E
) button to proceed.
Enter Time
(Press the
(
A
)
button to set cursor.)
Enter the current time in the format HH:MMA/P, where HH=hours (01–12);
MM=minutes (00–59). Select Am or Pm by pressing any number button,
then press
J
once again to save.
Dealer Code
Directly enter the Dealer Code, including leading zeros. Use the
1
through
9
buttons.
NOTE:
Press the
0
button for a zero. Press
J
to save.
Re-enter the Dealer Code to verify the previous code. Press
J
to save.
Press NEXT (
E
) button to proceed.
NOTE:
The Dealer Code can be two or more digits (up to 6 digits).
CLEAR PROGRAM:
Should it be necessary to create a new custom default program, (a) from the Dealer Program
Mode, press the
C
button to enter the Address Program Mode; (b) access Location 4091 (Clear Program) or 4093
(Cold Start); (c) press
J
and then (d) press the
C
button to exit the Dealer Program Mode. A System Trouble
Condition will occur. Press the
C
button to silence the keypad.
(Direct Entry)
DATE
07/18
/96
(Direct Entry)
TIME
09:10A
EXIT DEALER PROGRAM MODE:
This completes the custom default program. Press the
C
button to enter the
Direct Address Program Mode for further programming or press the
C
button once again to end all programming
and resume normal keypad operation.
(Direct Entry)
DCODE
(Direct Entry)
RE-ENT
(Direct Entry)
••••••
GEM-R
P
2ASe2 K
eyp
ad
: D
ate, Time, Dealer
Code & Exit Dealer Program Mode
