L
NAPCO Security Systems
X
GEM-P3200 Programming Instructions
WI818D 8/00
!
Page 37
Default for CS Receiver 1 Format depends on Easy Menu Question “RCVR FORMAT”. [Default = •(blank) •(blank)] for CS Receivers 2 and 3 Formats.
CS RECEIVER FORMAT OPTIONS
(ADDRESS 0520, 0521, 0525, 0526, 0550, 0551, 0575 & 0576)
ADDRESS 0525
LEFT
RIGHT
CS Receiver 1
Format
CS RECEIVER FORMATS:
Up to 3 CS Formats may be programmed.
!
1. Select the desired CS Receiver Format from the table shown.
!
2. Enter in the corresponding left and right digit address locations for
each CS Receiver.
NOTE:
Dark shaded data value box shows option not available.
ADDRESS 0550
LEFT
RIGHT
CS Receiver 2
Forma
t
ADDRESS 0575
LEFT
RIGHT
CS Receiver 3
Format
[Default = blank (•) blank (•)]
[Default = blank (•) blank (•)]
[Default = blank (•) blank (•)]
ADDRESS 0526
LEFT DIGIT (SUM
OF DATA VALUES)
RIGHT DIGIT (SUM
OF DATA VALUES)
RIGHT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
CS RECEIVER 1 OPTIONS
1400Hz Handshake/Kissoff *
2300Hz Handshake/Kissoff *
Enable Zone Number on Pulse Alarm
Single Digit Only
LEFT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
CS RECEIVER 1 OPTIONS
Sum Check
3/1 with Extended Restores
RESERVED
RESERVED
CS RECEIVER OPTIONS:
Select options for any of the three CS Receivers.
!
1. Select the desired option by circling
"
the data values for each digit (left and right).
!
2. Add the data values (ex: 15=1+2+4+8) from the selected options.
!
3. Enter in address location (left and right digits).
NOTE:
Dark shaded data value box shows option not available.
NOTE:
* If both are selected, 1400Hz
has priority over 2300Hz.
ADDRESS 0551
LEFT DIGIT (SUM
OF DATA VALUES)
RIGHT DIGIT (SUM
OF DATA VALUES)
RIGHT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
CS RECEIVER 2 OPTIONS
1400Hz Handshake/Kissoff *
2300Hz Handshake/Kissoff *
Enable Zone Number on Pulse Alarm
Single Digit Only
LEFT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
CS RECEIVER 2 OPTIONS
Sum Check
3/1 with Extended Restores
RESERVED
RESERVED
ADDRESS 0576
LEFT DIGIT (SUM
OF DATA VALUES)
RIGHT DIGIT (SUM
OF DATA VALUES)
RIGHT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
CS RECEIVER 3 OPTIONS
1400Hz Handshake/Kissoff *
2300Hz Handshake/Kissoff *
Enable Zone Number on Pulse Alarm
Single Digit Only
LEFT DATA
VALUES
(CIRCLE
"
)
1
2
4
8
CS RECEIVER 3 OPTIONS
Sum Check
3/1 with Extended Restores
RESERVED
RESERVED
CS RECEIVER FORMATS
Ademco Slow, Silent Knight Slow
Sescoa, Vertex, DCI, Franklin Fast
Radionics Fast
Silent Knight Fast
Radionics, DCI, Franklin Slow
Universal High Speed
Radionics BFSK
FBI 4/3/1
Radionics Modem 2
SIA
Ademco Point ID
Ademco Express
Pager
Radionics Modem IIe
DATA ENTRIES
LEFT
RIGHT
blank (•)
blank (•)
blank (•)
1
blank (•)
2
blank (•)
3
blank (•)
4
blank (•)
5
blank (•)
8
blank (•)
9
blank (•)
0
blank (•)
B
blank (•)
C
blank (•)
D
blank (•)
E
1
blank (•)
LEADING DIGITS FOR PAGER FORMAT:
In Pager Format reporting, the message typically begins with “00”. However, for some
pager services, this will cause the Pager's Voice Mail feature to activate. This option allows you to program these digits to any number
desired. Typical Pager report is “003 022 1234”, where 3 is the Event, 22 is the zone, and 1234 is the Subscriber ID number. For
example, if the Leading Digits are programmed as “98”, the Pager report will now appear as “983 022 1234”.
!
1. Enter in 1st and 2nd Leading Digits in right digit only (left digit is not used) as shown.
!
2. Valid entries are: 0-9.
[Default = blank (•) blank (•)]
Leading Digits for
Pager Format
(1st Digit)
ADDRESS 0520
LEFT
RIGHT
blank (•)
[Default = blank (•) blank (•)]
Leading Digits for
Pager Format
(2nd Digit)
ADDRESS 0521
LEFT
RIGHT
blank (•)
CS Receiver Format Options
