RS5-34 Telescopic Handler
TILT CYLINDER
PRINTED IN U.S.A.
604-2
913241
Alt= to hide template information
Alt+ to display template information
Template Name: OML_2_col
907871E
Template Date: 1997_02_12
G0805102
5. Locate the attachment tilt-up section on the right-
hand side of the control valve and remove the
rubber boot. Using a screwdriver, turn the screw
IN (clockwise) until it bottoms, then turn it OUT
(counterclockwise) until it bottoms. Reinstall the
rubber boot.
TILT CYLINDER REMOVAL
NOTE:
See Section 605 of this Service Manual for
the repair of this cylinder.
STEP 1
G0805214
Loosen and remove the retainer bolt (1) and nut (2)
from the lower pivot pin.
STEP 2
G0805215
Remove the lower pivot pin.
STEP 3
G080516
Mark the hydraulic hoses for correct assembly.
Disconnect the two hydraulic hoses from the tilt
cylinder.
STEP 4
Install caps and plugs on all hydraulic fittings to
prevent contaminating the hydraulic system.
2
1
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com