RS5-34 Telescopic Handler
PERSONAL SAFETY
PRINTED IN U.S.A.
100-2
913241
Alt= to hide template information
Alt+ to display template information
Template Name: OML_1_col
907871
Template Date: 1994_04_22
SAFETY RULES AND REMINDERS
●
DO NOT
start or operate the machine until you have read and understood the Operator’s Manual. You must
become familiar with all operating controls, instruments and procedures before attempting operation or repair.
●
If a service problem requires troubleshooting the machine under actual job site working conditions, unless you
are totally familiar with the machine controls and operating procedures, have an experienced operator assist
you.
●
Always perform the Mandatory Safety Shutdown Procedure and relieve hydraulic circuit pressure before
loosening or removing any hydraulic fittings or lines.
●
If hydraulic cylinder repair is required,
NEVER
use pneumatic or hydraulic pressure to aid in cylinder
disassembly.
●
Always disconnect the battery before working on the electrical system.
●
DO NOT
start the machine from any position other than seated in the operator’s seat.
●
If replacement parts are required,
DO NOT
use unauthorized parts or substitute materials. Use only Gehl
Company approved parts.
●
Consult Gehl Company on changes, additions or modifications that may be required for this machine to comply
with various regulations and safety requirements. Unauthorized modifications can cause serious injury or
death. Anyone making such unauthorized modifications is solely responsible for the consequences.
●
NEVER
bypass (wire around) any safety switch or other safety device. Be sure all safety switches and devices
are in proper working order before releasing the machine for operation.
WARNING
U.S. OSHA regulations require employers in
g e n e r a l i n d u s t r y a n d t h e c o n s t r u c t io n ,
s h ip y a r d a n d c a r g o -h a n d lin g in d u s tr ie s
(excepting agricultural operations) to ensure
th at fo rklift o per ato rs a re c omp ete nt, as
demonstrated by successful completion of a
training course.
T h e t r a i n i n g c o u r s e m u s t c o n s i s t o f
a c o mb in a t i o n o f fo r ma l i n s t r u c t io n a n d
practical training, including both forklift-
related and workplace-related topics, and
evaluation of the operator’s performance in
the workplace.
All operator training and evaluation is to be
c o n d u c t e d b y p e r s o n s w h o h a v e t h e
knowledge, training and experience to train
and evaluate operators.
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com
