RS5/6-34 Telescopic Handler
HYDRAULICS
PRINTED IN U.S.A.8
601-18
913241/BP0508
Alt= to hide template information
Alt+ to display template information
Template Name: OML_2_col
0-00000
Template Date: 1994_04_22
STEP 15
G0805077
Start the engine and remove the support stand.
Watch the pressure gauge and slowly move the
joystick to the lower position. The pressure gauge
should read 1500 psi (103 bar) as the boom is
moving downward.
If the pressure gauge reads 1500 psi (103 bar)
proceed to Step 19.
If the gauge reads more or less than 1500 psi (103
bar) continue with the next step.
STEP 16
G0805092
Shut off the engine. Remove the cap from the
counter balance valve on the lift cylinder.
STEP 17
G0805090
Loosen the lock nut (1) and turn the adjusting screw
( 2 ) c l o c k w i s e t o d e c r e a s e t h e p r e s s u r e a n d
counterclockwise to increase the pressure.
NOTE:
The pressure will change approximately 100
psi (7 bar) for every 1/4 turn of the adjusting screw
(2).
G0805188
Hold the adjusting screw (1) from turning while
tightening the lock nut (2).
STEP 18
Repeat Steps 15, 16 and 17 as necessary. If the
adjusting screw does not change the pressure,
replace the counter balance valve.
1
2
2
1
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com
