PRINTED IN U.S.A.
100-1
913241
Alt= to hide template information
Alt+ to display template information
Template Name: OML_1_col
907871
Template Date: 1994_04_22
RS5-34 Telescopic Handler
PERSONAL SAFETY
SAFETY
The above Safety Alert Symbol means
ATTENTION! ALWAYS BE ALERT! YOUR SAFETY IS INVOLVED!
When
you see this symbol, carefully read the message that follows and be alert to the possibility of injury or death.
Gehl Company always takes safety into consideration when designing its products, and designs guards for
exposed moving parts whenever it is possible and practical to do so. However, even with todays state-of-the-art
technology, it must be recognized that in order to assure machine functionality for specific purposes not all machine
hazards can be guarded or shielded.
Decals are placed on the machine to warn of additional hazards and must be read and strictly followed.
Gehl Company cannot anticipate every situation that may constitute a hazard. Therefore, the following safety rules
and reminders are not all-inclusive and do not replace federal, state or local regulations, insurance needs or other
safety code requirements.
MANDATORY SAFETY SHUTDOWN PROCEDURE
Before cleaning, lubricating or servicing this equipment:
1. Bring the machine to a full stop on level surface. (If parking on a slope or hillside cannot be avoided, park
across the slope and block the tires.)
2. Fully retract the boom and lower the attachment to the ground.
3. Place controls in
NEUTRAL
and set the park brake.
4. Idle the engine for gradual cooling.
5. Turn the key switch to OFF position and remove key (take key with you for security reasons).
ONLY when you have taken these precautions can you be sure its safe to proceed. Failure to follow the
above procedure could lead to serious personal injury or death.
!
!
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com
