RS5-34 Telescopic Handler
INNER BOOM
PRINTED IN U.S.A.
703-6
913241
Template Name: OML_2_col
Rac 0-00000
Template Date: 1997_02_12
Alt= to hide template information
Alt+ to display template information
STEP 15
Using the hoist and lifting strap, apply upward
pressure on the inner boom.
STEP 16
G1005074
Loosen and remove the bolts (1), lockplates (2) and
r e m o v e t h e t w o b o t t o m s l i d e p a d s f r o m t h e
intermediate boom.
STEP 17
G1005081
Remove the retaining bolt (1) and nut (2) from the
front sheave pin.
STEP 18
G1005080
Remove the front sheave pin (1) and the front chain
sheave (2).
STEP 19
Begin sli ding the in ner boom secti on from th e
intermediate boom. Before the inner boom section is
completely removed, put a wood block under the
nose portion of the boom, and lower the inner boom
so that the nose portion is resting on the block and
remains level.
STEP 20
G1005084
Position the hoist and lifting strap on the inner boom
33 inches (840 mm) from the nose (as shown). This
will allow a balanced lifting point.
NOTE:
Without any attachments on the boom.
STEP 21
R e m o v e t h e i n n e r b o o m s e c t i o n f r o m t h e
intermediate boom.
1
2
1
1
2
1
1
2
2
1
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com