RS5/6-34 Telescopic Handler
HYDRAULICS
PRINTED IN U.S.A.
601-40
913241/BP0508
Template Name: OML_2_col
0-00000
Template Date: 1994_04_22
Alt= to hide template information
Alt+ to display template information
STEP 94
G0805133
Shut off the engine. Remove the gauge (1) from port
J (3) and install the hose.
Remove the hose from port PB (1) on the flow
divider. Install a 1000 psi (69 bar) pressure gauge (2)
on port PB (1) and a plug in the hose end.
STEP 95
G0805137
Start the engine and run a 1000 RPM.
STEP 96
G0805078
Move the park brake switch to the OFF position. The
pressure gauge should read 350 psi (24 bar) when
the park brake is released.
If the pressure is less than 350 psi (24 bar) but was
at 350 psi (24 bar) when the park brake switch was
ON, repair or replace the park brake in the front axle.
If the pressure is 350 psi (24 bar) but the park brake
will not release, repair or replace the park brake
solenoid valve and repeat Steps 95 and 96 before
replacing or repairing the park brake in the front axle.
Shut off the engine. Remove the pressure gauge
from port PB (1) and install the hose (2) on the port
(1).
STEP 97
Perform Steps 1 through 5 of this manual to test the
hydraulic pump.
If the hydraulic pump pressure is 3000 psi (207 bar)
replace the flow divider.
If the hydraulic pump pressure is less than 3000 psi
(207 bar) replace the hydraulic pump.
2
3
1
1
2
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com
