GEA Fury 602 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 44

GEA Fury 602 Скачать руководство пользователя страница 5

5

Notes for the Reader

Notes on the Illustrations

Notes for the Reader

The present Operating Instructions are part of the user information for the cleaner. The
Operating Instructions contain all the information you need to transport, install, commis-
sion, operate and carry out maintenance for the cleaner.

Binding Character of These Operating Instructions

These Operating Instructions contain the manufacturer's instructions to the operator of
the cleaner and to all persons who work on or use the cleaner regarding the procedures
to follow.

Carefully read these Operating Instructions before starting any work on or using the
cleaner. Your personal safety and the safety of the cleaner can only be ensured if you
act as described in the Operating Instructions.

Store the Operating Instructions in such a way that they are accessible to the operator
and the operating staff during the entire life cycle of the cleaner. When the location is
changed or the cleaner is sold make sure you also provide the Operating Instructions.

Notes on the Illustrations

The illustrations in these Operating Instructions show the cleaner in a simplified form.
The actual design of the cleaner can differ from the illustration. For detailed views and
dimensions of the cleaner please refer to the design documents.

«
...
3
4
5
6
7
...
»

Содержание Fury 602













































Отзывы:

Нет отзывов