GEA Fury 602 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 44

GEA Fury 602 Скачать руководство пользователя страница 23

23

Installation and Commissioning

Installation Dimensions

Notes on Installation

Observe the following points before installing the cleaner:

•

Switch off the power circuit and protect it from unauthorized switch-on.

•

Protect the supply pump for CIP medium against unauthorized switch-on.

•

Shut off the cleaning medium supply line and secure the line against being opened.
There must not be any chemical cleaning medium in the supply line.

•

Make sure that there are no foreign objects in the system.

•

Clean (rinse) the cleaning medium supply line before connecting the cleaner.

•

The electrical installation must be in accordance with the requirements of EN 60079-
14 in areas with explosive gas atmosphere and in accordance with the requirements
of EN 61241-4 in areas with explosive dust atmosphere.

Installation Dimensions

Installation dimensions

The smallest manhole diameter recommended for normal operation is 200mm (8"). The
nozzles must be vertically aligned. Take care to avoid damaging the cleaner.

Dimensions of manhole with vertically aligned nozzles

1.5"

/

/

BSP NPT NPS

321

mm

17

mm

91

mm

200 mm (8")

«
...
21
22
23
24
25
...
»

Содержание Fury 602













































Отзывы:

Нет отзывов