GEA Fury 602 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 44

GEA Fury 602 Скачать руководство пользователя страница 16

Safety

Residual Risk

16

Operating Instructions · GEA Index Cleaner Fury 602

Edition 01/08/2016

Setting into Operation

Observe the following notes

•

When installing the cleaner, secure it against tipping and twisting and secure all
fixing points correctly.

•

Only set the cleaner into operation in closed vessels.

Operation

Observe the following notes

•

Provide suitable protective measures to ensure that the cleaner cannot be set into
operation outside of the vessel.

•

In the event of faults, stop all media supplies immediately.

•

Check the installation situation to ensure that the cleaner is not in contact with other
parts and that rotation cannot be obstructed.

•

Do not allow the maximum cleaning pressure and the maximum cleaning tempera-
ture to be exceeded.

•

Vessels, tanks and road tankers etc. must be grounded by suitable means.

Maintenance

Observe the following notes

•

Close all media supply lines and ensure that no hot or aggressive media are applied
to or are in the cleaner.

•

Never set the cleaner down on the lower body.

•

Do not attempt to turn the nozzles by hand.

•

Do not use the lower body as a tool contact point for installation or removal.

«
...
14
15
16
17
18
...
»

Содержание Fury 602













































Отзывы:

Нет отзывов