GEA Fury 602 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 44

GEA Fury 602 Скачать руководство пользователя страница 36

Installation

Assembling the Cleaner

36

Operating Instructions · GEA Index Cleaner Fury 602

Edition 01/08/2016

22.

Assemble the following parts: insert the circlip (74) into the rod end (49). Place the
end sleeve (70) in position, then the rod end plug (35) and the end sleeve (70);
screw the connecting rod (40) in position.

23.

Screw the spring ends (20) into the springs (21) and adjust to give a dimension of
52 mm (see illustration).

24.

Assemble the following parts into position on the pillar (3004): straight pin (18),
sleeve (19), four spring ends (20), two washers (42), two split pins (43), bearing
bush (66), roller (17) and two springs (21).

25.

Expand the split pins (43) to secure the assembly.

26.

Assemble the crosshead (25) with the following parts: plug (33), conrod (34), guide
plug (23), set screw (41).

27.

Slide the assembly into place over the spindle (11), but not at this stage over the
piston rod (24). Fit the bearing flange (38) into place.

28.

Slide the crosshead (25) onto the piston rod (24) and secure. Secure the set
screw (41) using a hex key (a/f 3/16"). Fit the second straight pin (18) with two
washers (42). Secure with two split pins (43).

29.

Screw the locknut (27) onto the conrod (34). Screw the rod end (49) onto the
conrod (34) and adjust to give a dimension of 135 mm (see illustration).

30.

Fit O-rings (12) onto the ends of the long water tube (6) and the short water tube (7).

31.

Apply Loctite to the threads of the two control screws (67) and screw into place.
Position filter (56) and filter sealing ring (57). Slide the valve block (9) into place and
secure.

!

When rotating the nozzles forwards and backwards, the valve spindle (10) should

click over with a sharp, snappy action. If this action is sluggish check that the

pillar (4) is square. If it is not, undo the screw (54) and turn the pillar (4) either way

fractionally so that the ends of the bearing flange (38) sit evenly on the valve

spindle (10) without sideways bias.



Done

52 mm

135 mm

«
...
34
35
36
37
38
...
»

Содержание Fury 602













































Отзывы:

Нет отзывов