GEA Fury 602 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 44

GEA Fury 602 Скачать руководство пользователя страница 13

13

Safety

Instructions for the Safe Operation

Setting into Operation

For setting into operation, the following principles apply:

•

Only allow properly qualified staff to set the cleaner into operation.

•

Establish all connections correctly.

•

When the cleaner is switched on, the danger zones must be free.

•

Remove any liquids that have escaped without leaving residues.

Operation

For operation, the following principles apply:

•

Monitor the cleaner during the operation.

•

Safety devices must not be changed, removed or taken out of service. Check all
safety devices at regular intervals.

•

All guards and hoods must be fitted as intended.

•

Structural alterations of the cleaner are not permitted. Immediately report any
changes on the cleaner to the person responsible.

•

Always keep danger zones clear. Do not leave any objects in the danger zone. Only
allow persons to enter the danger zone when the machine is de-energized.

•

Regularly check that all emergency stop devices are working correctly.

•

The cleaner contains a threadlocker/sealant (Loctite 243) with NSF P1 approval.

Shutting Down

For shutting down, the following principles apply:

For longer periods of standstill, observe the storage conditions, see “Storage“ (page 19).

«
...
11
12
13
14
15
...
»

Содержание Fury 602













































Отзывы:

Нет отзывов