GEA Fury 602 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 44

GEA Fury 602 Скачать руководство пользователя страница 15

15

Safety

Residual Risk

Environmental Protection

Harm to the environment can be avoided by safety-conscious and proactive behaviour
of the staff.

For environmental protection the following principles apply:

•

Substances harmful to the environment must not be discharged into the ground or
the sewage system.

•

Always observe the pertinent regulations relating to waste avoidance, disposal and
utilization.

•

Substances harmful to the environment must be collected and stored in suitable
containers. Clearly mark the containers.

•

Dispose of lubricants as hazardous waste.

Signage

Dangerous points on the cleaner are indicated by warning signs, prohibition signs and
mandatory signs.

The signs and notes on the cleaner must always be legible. Any illegible signs must be
replaced immediately.

Residual Risk

Hazard Areas

Transport, Installation

Do not set the cleaner down on the lower body. Store the cleaner in horizontal position
and secure it against rolling away to the side.

Signs on the cleaner

Sign

Meaning

General hazard warning

Warning Crushing

Explosive atmosphere hazard warning

«
...
13
14
15
16
17
...
»

Содержание Fury 602













































Отзывы:

Нет отзывов