GEA Ariete NS3015P, Инструкция по эксплуатации

Страница: 136 / 337

Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
4C064E2C
GEA Niro Soavi 12
The digital pressure gauge (M) will switch automatically after a few minutes if no pressure is measured,
to preserve the internal battery.
To start the pressure gauge simply press the front ZERO/ON push-button; keep this button pressed
for a few seconds to reset the instrument to ZERO if the reading given is NEGATIVE.
If the display reads “BATT” it means that the battery is down and needs to be replaced.
Disassemble the pressure gauge and, on a dry surface, remove the rear screws to lift off the
cover on the battery housing. The battery used is a long life 9V lithium battery, size PP3; in special
circumstances a standard 9V alkaline battery may be used.