GE Typhoon 9200, Руководство по эксплуатации

Страница: 50 / 78

Typhoon Operating Instructions 28-9623-56 AA
49
Operation 4
Performing a scanning 4.4
10 Focal Plane list ( Fig 4-1 , J):
• In the Storage phosphor scan acquisition mode, the Platen parameter is pre-
selected so that the Typhoon instrument scans the area just above the glass
platen.
11 Optional: Enter user comments ( Fig 4-1 , K).
If desired, comments to the scan can be entered in the User Comment box. The
comments are for reference only and do not affect the scan.
12 Optional: Tick the DIGE File Naming Format box ( Fig 4-1 , L), to save scanning
samples in the DIGE file naming format. It is possible to create a separate image
file for each channel in each scan area. See the
Typhoon User´s Guide for
instructions.
50 For samples requiring a higher resolution (such as whole body
autoradiography).
Produces 200 data points per centimeter and 400 data lines per
grid square.
Note: For Chemiluminescent scanning the amount of time
required to scan using this pixel size could exceed the
signal intensity of the chemiluminescent sample.
25 For samples requiring a very high resolution (such as high-
density macroarrays).
Produces 400 data points per centimeter and 800 data lines per
grid square.
Note: For Chemiluminescent scanning the amount of time
required to scan using this pixel size could exceed the
signal intensity of the chemiluminescent sample.
10 For samples requiring the highest resolution (such as
microarrays)
Produces 1 000 data points per centimeter and 2 000 data lines
per grid square.
Available for Typhoon 9210, 9410 and
Trio+ only.
Note: Because of file size limitation, there is some limitation
regarding scanning, see Typhoon User´s Guide for
information.
Note: For Chemiluminescent scanning the amount of time
required to scan using this pixel size could exceed the
signal intensity of the chemiluminescent sample.
Pixel size
(µm) Recommendations