GE Typhoon 9200, Руководство по эксплуатации

Страница: 30 / 78

Typhoon Operating Instructions 28-9623-56 AA
29
Operation 4
Preparations before start 4.3
3 During the initialization, the instrument Power light (B) flashes green for
approximately 45 seconds. After initialization, the flashing green light turns solid
green.
Note: After you turn on the Typhoon instrument, wait approximately 30 minutes
for the instrument to warm up before you start the first scan. Scanning
before the instrument is warmed up can affect the accuracy of the collected
data.
4 Typhoon 9400 and 9410 only:
When the Typhoon instrument is started, the Blue laser module turns on
automatically.
a) When power is available, the Power light (C, top) on the front of the Blue laser
module turns green.
b) When the instrument is communicating with the Blue laser module the
Connection light (C, middle) turns green.
c) When the Typhoon instrument completes the self-test the Laser On light (C,
bottom) turns green. This takes approximately 1 minute.
5 Turn on the computer and monitor according to the manufacturer’s instructions.
Note: If the computer was already on when you turned on the Typhoon
instrument, you must restart the computer
6 Locate and double-click the Typhoon Scanner Control software shortcut icon on
the desktop or select Typhoon Scanner Control software using the
Start menu.
7 The Typhoon Scanner Control software opens.
4.3 Preparations before start
Sample recommendations
General sample handling recommendations
• Make sure the sample is free from dust and powder. Wear powder-free gloves
when handling the samples.
• Dust and powder fluoresce and scatter light. This causes artifacts on the images
and can interfere with the quantitation.