GE Typhoon 9200 Скачать руководство пользователя страница 15

Страница: 15 / 78

2 Safety instructions

2.1 Safety precautions

Typhoon

Operating Instructions

28-9623-56

Installing and moving the

instrument

WARNING
Hazardous substances.

When using hazardous chemical and

biological agents, take all suitable protective measures, such as
wearing protective glasses and gloves resistant to the substances used.
Follow local and/or national regulations for safe operation and
maintenance of the system.

WARNING
Power cord.

Only use power cords delivered or approved by GE

Healthcare.

WARNING
Protective ground.

The equipment must always be connected to a

grounded power outlet.

WARNING

Make sure that the instrument is placed on a stable flat bench with
adequate space for ventilation.

WARNING
Access to power switch and power cord.

The power switch must

always be easy to access. The power cord must always be easy to
disconnect.

WARNING
Supply voltage.

Make sure that the supply voltage at the wall outlet

corresponds to the marking on the instrument, before connecting the
power cord.

CAUTION
Heavy object.

The Typhoon instrument weighs approximately 160 kg.

The instrument should be moved only by authorized Technical Support
representatives using proper lifting equipment.

Содержание Typhoon 9200















































































Результаты поиска

Содержание Typhoon 9200

Отзывы:

Похожие инструкции для Typhoon 9200

Бренды по названию

Популярные бренды

GE Typhoon 9200, Руководство по эксплуатации

Результаты поиска

Содержание Typhoon 9200

Отзывы:

Похожие инструкции для Typhoon 9200

Бренды по названию

Популярные бренды