GE Multilin EPM 2000 Series Скачать руководство пользователя

Страница: 2 / 52

Customer Service and Support

Customer service and support is available 24 hours a day, 7 days a week. Please have the

model, serial number and a detailed problem description available. If the problem concerns a

particular reading, please have all meter readings and settings available.

For customer or technical assistance, call: 1-888-GE4SERVICE (1-888-434-7378)

Product Warranty

GE warrants all products to be free from defects in material, workmanship and title and will

be of the kind and quality specified in GE’s written description in the manual. The foregoing

shall apply only to failures to meet said warranties, which appear within one year from the

date of shipping. During the warranty period, GE will, at its option, either repair or replace

any product that proves to be defective.

Limitation of Warranty

This warranty does not apply to defects resulting from unauthorized modification, misuse or

use for any reason other than electrical power monitoring.

OUR PRODUCTS ARE NOT TO BE USED FOR PRIMARY OVER-CURRENT

PROTECTION. ANY PROTECTION FEATURE IN OUR PRODUCTS IS TO BE

USED FOR ALARM OR SECONDARY PROTECTION ONLY.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR

IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. ENERCON SHALL NOT BE LIABLE

FOR ANY PENAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES

ARISING FROM ANY AUTHORIZED OR UNAUTHORIZED USE OF ANY

ENERCON PRODUCT. LIABILITY SHALL BE LIMITED TO THE ORIGINAL

COST OF THE PRODUCT SOLD.

Statement of Calibration

Our instruments are inspected and tested in accordance with specifications published by an

independent testing facility. The accuracy and calibration of our instruments are traceable to

the National Institute of Standards and Technology through equipment that is calibrated at

planned intervals by comparison to certified standards.

Disclaimer

The information presented in this publication has been carefully checked for reliability;

however, no responsibility is assumed for inaccuracies. The information contained in this

document is subject to change without notice.

Содержание Multilin EPM 2000 Series





















































Результаты поиска

Содержание Multilin EPM 2000 Series

Отзывы:

Похожие инструкции для Multilin EPM 2000 Series

Бренды по названию

Популярные бренды

GE Multilin EPM 2000 Series, Инструкция по эксплуатации

Результаты поиска

Содержание Multilin EPM 2000 Series

Отзывы:

Похожие инструкции для Multilin EPM 2000 Series

Бренды по названию

Популярные бренды