GE Multilin
Sub Meters
24
Table 2-4: Editing the Setup Values
First, you must enter the Main Menu and reach “SET” using the previous Table. This example
illustrates changing System Mode (SYS) from “Star” to “Delta”.
Action
Display
Remarks
"Set"
You’re in the Main Menu.
Press to enter SET
SYS
V.PRI
V.SEC
Wiring System.
Voltage primary.
Voltage secondary.
Press to edit
"StAR"
415.0
415.0
Wiring System = Star 3E
Voltage primary = 415v.
Voltage secondary = 415v.
We have now reached SYS (top
row) for editing.
Press to view Value.
"StAR"
415.0
415.0
Wiring System = Star 3E
Voltage primary = 415v.
Voltage secondary = 415v.
Press to edit SYS value.
The value blinks.
"
Star
"
415.0
415.0
Blinks. Only Top Row is edited
Ignore
Ignore
Press to change to Delta 2E. "
Delta
"
415.0
415.0
Blinks. Note: To discard the change:
•
Press .
•
Restores the previous value.
Press to accept the value.
"Delta"
415.0
415.0
Steady. SYS is now set to Delta.
Press to scroll down, and to change
other values.
We’re done. Press to head
back.
"
SYS
"
Blinks
Press again.
"Save"
"
y
"
NOTE: To discard present changes, press to
show “Save
n
”.
Press to accept "
y
" (yes, save) "PASS"
“Set”
Stores the Setup changes.
Now, you’re back in the Main Menu and can
go to “RUN” and to “RMS”.