GE MDS entraNET 900, Техническое руководство

Страница: 97 / 220

05-4055A01, Rev. E MDS entraNET Technical Manual 87
Figure 3-51. Reprogramming Menu
•
TFTP Host Address
—IP address of the host computer from which
to get the file. [
Any valid IP address
]
•
Firmware Filename
—Name of file to be received from the TFTP
server. Verify that this string corresponds to the TFTP directory
location. May require a sub-directory (for
example:
entranet/bkrfto-1_0_0.gpk)
.
[
Any 40-character alphanumeric string
]
•
TFTP Timeout
—Time in seconds the TFTP server waits for a
packet ACK (acknowledgment) from the transceiver before
suspending the file transfer. [
10 to 120 sec; 30
]
•
Retrieve File
—Initiate the file transfer from the TFTP server.
Placed into inactive firmware position in the transceiver’s
non-volatile memory. [
Y, N
]
•
Image Verify
—Verify the integrity of the firmware file held in the
radio.
•
Image Copy
—Initiate the copying of the active firmware into the
inactive image.
•
Reboot Device
—Initiate restarting the transceiver. This interrupts
data traffic through this radio and the network, if performed on
an AP. Use this command to toggle between firmware images.
•
Current Firmware
—Shows the current firmware revision level.
3.11.2 Configuration Scripts Menu
A Brief Description of Configuration Files
If you plan to have more than a few transceivers in your network, you
might want to use the Configuration Scripts Menu (
Figure 3-52 on
Page 88 ) to configure similar radios from a common set of parameters.
Over 50 customer settings that optimize the network are saved in a