GE MDS entraNET 900, Техническое руководство

Страница: 125 / 220

05-4055A01, Rev. E MDS entraNET Technical Manual 115
REBOOT Restarts the radio firmware.
Optional arguments:
SAME
—Restarts the radio with the active firmware image.
OTHER
—Restarts the radio with the inactive image.
APP1
—Restarts the radio with Application Image 1.
APP2
—Restarts the radio with Application Image 2.
SLEEP Sets or displays the low-power operating mode. These modes are
commonly used where power consumption must be kept to a minimum,
such as in solar-powered installations.
Optional arguments:
CMD
—Displays all settable optional arguments and their current values.
You can copy this list to a text file as a record of your configuration.
DTRSENSE=<low, high>
—Select the level of RS-232 DTR signal used by
the endpoint device to wake the radio:
LOW
: DTR Active LOW
HIGH
: DTR Active HIGH
When
WAKE
is set to
DTR
, the radio will wake on receiving this signal
from the endpoint device.
HANGTIME=<hangtime in ms>
—Minimum wake time in milliseconds
(100–60000) before returning to Low Power mode.
INDICATOR=<on|off>—
Indicates whether or not the Sleep indicator LED is
active.
ON
: Sleep Mode indicator is on.
OFF
: Sleep Mode indicator is off.
MODE=<mode>
—Set the mode as follows:
NONE
: Normal operation; the radio does not sleep.
SLEEP
: Sleep mode is enabled. In this mode, the radio draws less
than 20 mA at 12 V. It can be brought back online (ready to send
data) within 75 ms. Wake-up is accomplished by asserting the
DTR line on the
COM2
port, or by the appearance of payload data
at the active
COM
port.
Sleep mode also works on the Ethernet interface, except that the
endpoint device must not require Ethernet pulse signals in order
to send data. This mode is similar to a PC Ethernet port “Wake
on data” setting.