GE MDS entraNET 900, Техническое руководство

Страница: 120 / 220

110 MDS entraNET Technical Manual 05-4055A01, Rev. E
NETADDR=<netaddr>
—Sets or displays the network (system) address
(0-30000) when in direct mode.
PWR=<range integer>—
In
ROOT
mode, this command sets the radio power
setting in dBm (the range depends on the radio model).
REPEAT=<range integer>
—In
ROOT
mode, this command sets the
Broadbase Repeat Count.
0
: Min=0
15
: Max=15
RETRY=<range integer>
—In
ROOT
mode, this command sets the
Maximum Unicast Retry Count.
0
: Min=0
15
: Max=15
SKIPZONES=<bitmap>
—In
ROOT
mode, this command sets the Skip Zones
Binary Map (HEX: preceded by
0x
).
bit0:ZONE1
; 1=Skipped 0=Active
bit1:ZONE2
; 1=Skipped 0=Active
bit2:ZONE3
; 1=Skipped 0=Active
bit3:ZONE4
; 1=Skipped 0=Active
bit4:ZONE5
; 1=Skipped 0=Active
bit5:ZONE6
; 1=Skipped 0=Active
bit6:ZONE7
; 1=Skipped 0=Active
bit7:ZONE8
; 1=Skipped 0=Active
STATE=
—( read only ) Displays the current Direct mode status.
Currently operating in Infrastructure mode
Currently operating in Direct mode
TYPE=
—Sets or displays the role of this radio in Direct mode.
NODE
: Operates as one of the Node Remotes
ROOT
: Operates as the Single Root Remote
ENCRYPT Sets or displays the configuration for data encryption.
Optional arguments:
MODE=<ON|OFF>
—Sets or displays the data encryption mode.
ON
: Data encryption on
OFF
: Data encryption off
PHRASE=<string>
—Sets or displays the Encryption Pass Phrase (8–41
characters).