GE MDS entraNET 900, Техническое руководство

Страница: 150 / 220

140 MDS entraNET Technical Manual 05-4055A01, Rev. E
In the future, if you need to set up another radio or make changes, you
can go directly to this screen by pressing
B
instead of
A
in step 5 above.
Figure 5-28. View Current Settings
5.6 Mixed-Mode Application Example
In this configuration, the Host PC can use both TCP and serial-to-serial
data paths to reach the endpoint devices. This can be helpful when a
mixed collection of endpoint devices is present, where some endpoint
devices operate over Ethernet while others are polled using a serial port.
See
Figure 5-29 on Page 141 and Table 5-6 on Page 141 .
5.6.1 Operation and Data Flow
• Communicate with endpoint devices A and B by sending and
receiving data from the AP COM2 port.
• Communicate with endpoint devices C and D by Telneting to
the IP address of each endpoint device.