GE MDS entraNET 900, Техническое руководство

Страница: 108 / 220

98 MDS entraNET Technical Manual 05-4055A01, Rev. E
Figure 3-63. DNP3 Routing Menu
•
DNP Routing Enable
—Enables or disables the DNP3 routing
function. [
Enabled, Disabled; Disabled
]
•
DNP Multicast Address
—Specifies the group address with which
to exchange UDP-encapsulated messages with other IP devices
that are DNP3 aware. This includes PCs, endpoint devices, and
other APs. When a DNP3 packet is received and no routing
information exists for the target device (see
DNP3 routing
database
below), the AP sends the packet to all other IP devices
in an attempt to find a radio that recognizes the address.
[
Valid IP address; 224.254.1.1
]
•
DNP Multicast Port
—Specifies the IP port number used for all
DNP3 Multicast messaging. [
0-65535; 20000
]
•
DNP Unicast Port
—This field specifies the IP port number used to
establish a socket to other IP devices. This UDP port (along with
the AP local IP address) is used to encapsulate DNP3 messages
over IP. [
0-65535; 20001
]
•
DNP3 Routing Database
—This selection brings up a screen where
the current DNP3 routing information known by the AP can be
viewed.
NOTE: For installations that include multiple APs, it is important to
properly configure IAPP, which is located within the
Mobility
Menu . IAPP allows APs to share their DNP3 routing
information.