GE MDS entraNET 900, Техническое руководство

Страница: 58 / 220

48 MDS entraNET Technical Manual 05-4055A01, Rev. E
•
Current IP Gateway
—Displays the IPv4 address of the default
gateway device, typically a router.
NOTE: The radio is not a router, so all IP parameters access local
management only and have no effect on the routing of system
data.
3.4.3 Wireless MAC Configuration Menu
Invisible place holder
Figure 3-15. Wireless Mac Configuration Menu
Invisible place holder
•
Net(work) Address
—( You must review this setting. ) ID of the
network to which this radio belongs (1-15 alphanumeric
characters). An address is essential for connection of Remotes
to the AP in the entraNET network. The radio network address
is not programmed at the factory. [
9999
]
•
X Address
—Extended Address, used for installations with
multiple APs supporting mobility. This address must be a
unique value for each AP. This parameter has no effect in single
AP networks. [
0
]
•
FEC
—Forward Error Correction status (enabled or disabled).
The FEC setting has a significant effect on the throughput or
speed of the radio network. For a discussion of this and other
issues affecting throughput,
see “OPTIMIZING
PERFORMANCE” on Page 160 . In particular, Table 6-7 on
Page 163 of this section shows the FEC settings and how they
relate to hop times and the bytes -per-packet rate. [
Enabled
,
Disabled
;
Disabled
]