manualshive.com logo in svg

GE F35, Инструкция по эксплуатации

Barco F35 - профессиональный проектор высокой четкости. Чтобы начать пользоваться им сразу, скачайте бесплатное руководство по быстрому запуску и руководство пользователя с нашего сайта. Научитесь получать максимум от вашего устройства. Скачать с manualshive.com.

Поделиться
Скачать
background image

5-158

F35 MULTIPLE FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL

PRODUCT SETUP

CHAPTER 5: SETTINGS

5

The LEDs can be customized to illuminate when a selected FlexLogic operand is in the logic 1 state. The trip and alarm 
LEDs can also be customized in a similar manner. To ensure correct functionality of all LEDs, an LED test feature is also 
provided.

5.3.12.3  LED test

SETTINGS 

 PRODUCT SETUP 



 USER-PROGRAMMABLE LEDS 

 LED TEST

When enabled, the LED test can be initiated from any digital input or user-programmable condition, such as a user-
programmable pushbutton. The control operand is configured under the 

LED TEST CONTROL

 setting. The test covers all 

LEDs, including the LEDs of the optional user-programmable pushbuttons.
For the enhanced and standard front panels, the test consists of the following three stages:
1.

All 62 LEDs on the relay are illuminated. This is a quick test to verify if any of the LEDs is “burned.” This stage lasts as 
long as the control input is on, up to a maximum of one minute. After one minute, the test ends.

2.

All the LEDs are turned off, and then one LED at a time turns on for one second, then back off. The test routine starts at 
the top left panel, moving from the top to bottom of each LED column. This test checks for hardware failures that lead 
to more than one LED being turned on from a single logic point. This stage can be interrupted at any time.

3.

All the LEDs are turned on. One LED at a time turns off for one second, then back on. The test routine starts at the top 
left panel moving from top to bottom of each column of the LEDs. This test checks for hardware failures that lead to 
more than one LED being turned off from a single logic point. This stage can be interrupted at any time.

For the graphical front panel, the test consists of the following stages:
1.

All 22 LEDs on the relay are illuminated. This is a quick test to verify if any of the LEDs is "burned." This stage lasts as 
long as the control input is on, up to a maximum of one minute. After one minute, the test ends.

2.

All the LEDs are turned off, and then one LED at a time turns on with the orange color for one second, then back off. 
The test routine starts at the top left panel, moving from the top to bottom for all 14 LEDs. Then the eight pushbutton 
LEDs are tested in the same manner. This test checks for hardware failures that lead to more than one LED being 
turned on from a single logic point. This stage can be interrupted at any time.

3.

All the LEDs are turned on with the orange color. One LED at a time turns off for one second, then back on. The test 
routine starts at the top left panel moving from top to bottom for all 14 LEDs. Then the eight pushbutton LEDs are 
tested in the same manner. This test checks for hardware failures that lead to more than one LED being turned off 
from a single logic point. This stage can be interrupted at any time.

4.

Additionally, stages 2 and 3 are repeated twice for the five device status LEDs and nine event cause LEDs, one time 
with green color on and the other with red color on.

When testing is in progress, the LEDs are controlled by the test sequence, rather than the protection, control, and 
monitoring features. However, the LED control mechanism accepts all the changes to LED states generated by the relay 
and stores the actual LED states (on or off) in memory. When the test completes, the LEDs reflect the actual state resulting 
from relay response during testing. The reset pushbutton does not clear any targets when the LED Test is in progress.
A dedicated FlexLogic operand, 

LED TEST IN PROGRESS

, is set for the duration of the test. When the test sequence is initiated, 

the LED TEST INITIATED event is stored in the event recorder.
The entire test procedure is user-controlled. In particular, stage 1 can last as long as necessary, and stages 2 and 3 can be 
interrupted. The test responds to the position and rising edges of the control input defined by the 

LED TEST CONTROL

 

setting. The control pulses must last at least 250 ms to take effect. The following diagram explains how the test is 
executed.

LED TEST

LED TEST FUNCTION:

Disabled

Range: Disabled, Enabled

LED TEST CONTROL:

Off

Range: FlexLogic operand

Содержание F35











































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F35

ABB ControlMaster CM15 Commissioning Instructions preview
ControlMaster CM15
Бренд: ABB Страницы: 28
Valve Concepts 3200 Installation, Operation And Maintenance Manual preview
3200
Бренд: Valve Concepts Страницы: 15
Paratec TE Series User Manual preview
TE Series
Бренд: Paratec Страницы: 8
J+J S2 Handbook preview
S2
Бренд: J+J Страницы: 33
Saitek X36 Manual preview
X36
Бренд: Saitek Страницы: 4
7th Sense medialon Showmaster Go User Manual preview
medialon Showmaster Go
Бренд: 7th Sense Страницы: 2
IDTECK iTDC Troubleshooting Manual preview
iTDC
Бренд: IDTECK Страницы: 94
Samson 3351 Mounting And Operating Instructions preview
3351
Бренд: Samson Страницы: 20
PACH & COMPANY AeGIS 4000 Quick Installation And Programming Manual preview
AeGIS 4000
Бренд: PACH & COMPANY Страницы: 4
Linak CBH Advanced User Manual preview
CBH Advanced
Бренд: Linak Страницы: 33
Topway LMT070DICFWD-NJN User Manual preview
LMT070DICFWD-NJN
Бренд: Topway Страницы: 34
mikroElektronika ETH WIZ click Quick Start Manual preview
ETH WIZ click
Бренд: mikroElektronika Страницы: 3
Window Master WMU 831 Installation Instructions Manual preview
WMU 831
Бренд: Window Master Страницы: 7
Nuvoton NuMicro M252 Series User Manual preview
NuMicro M252 Series
Бренд: Nuvoton Страницы: 38
Danfoss VLTAutomationDrive FC 360 Quick Manual preview
VLTAutomationDrive FC 360
Бренд: Danfoss Страницы: 52
BQT BioX Series Installation Manual preview
BioX Series
Бренд: BQT Страницы: 2
Viva VRM2 Instruction Manual preview
VRM2
Бренд: Viva Страницы: 9
Delta DZNT-104T Installation Manual preview
DZNT-104T
Бренд: Delta Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды