manualshive.com logo in svg

GE F35, Инструкция по эксплуатации

Barco F35 - профессиональный проектор высокой четкости. Чтобы начать пользоваться им сразу, скачайте бесплатное руководство по быстрому запуску и руководство пользователя с нашего сайта. Научитесь получать максимум от вашего устройства. Скачать с manualshive.com.

Поделиться
Скачать
background image

CHAPTER 5: SETTINGS

PRODUCT SETUP

F35 MULTIPLE FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL

5-105

5

TxGOOSE1 DatSet

Range: None, TT6DataSet1,TT6 DataSet2, … TT3DataSet01,TT3 DataSet02, …
Default: None

This setting selects the published data set using the UR Setup software designator for the data set. If None is selected, 
no TxGOOSE1 messages are sent.
The IEC 61850 name of the data sets are configured in the Datasets panel, as described later.
Some datasets are designed for the TT6 transfer time class (3 ms), while others are designed for the TT3 class (100 ms). 
The performance of a TxGOOSE is determined by its dataset. Use TT6 datasets for trips and blocking applications, TT3 
datasets for slow automatic interactions. The 61850 name of the datasets are configured in the Datasets panel.
An ObjectReference to the data set, which consists of the concatenation of the string "<LDName>/LLN0." and the data 
set name, is published in the datSet field of TxGOOSE1 messages and can be used by subscribers to discriminate 
TxGOOSE1 messages from other GOOSE messages. <LDName> is a syntactic variable that is set to the value of setting 
Master functional ldName if one or more characters have been entered to that setting, otherwise the value of setting IED 
NAME suffixed with "Master".
To configure a DataSet, select it at the top of the window from the drop-down list. In the lower part of the window, drag 
and drop configuration items to the right side. Dataset members configured here affect other Report or TxGOOSE 
control blocks that use the same DataSet.
The performance of the TxGOOSE is determined by the performance of the selected dataset. When the selection is 
TT3DataSet01, TT3DataSet02, … it is possible that transient events can be missed.

TxGOOSE1 DST MAC

Range: any 12 digit hexadecimal number
Default: 01-0C-CD-01-00-00

When the 

TxGOOSE1 MODE

 setting is R-GOOSE, the 

TxGOOSE1 DST MAC

 address is set to 00 00 00 00 00 00 and cannot be 

changed. Otherwise, the value entered here sets the Ethernet destination Media Access Control (MAC) address in 
published TxGOOSE1 messages. As the standard requires that the address have the multicast bit set TRUE, that is to say 
the second digit is set to an odd number, messages transmitted have the multicast bit set TRUE no matter its value in 
this setting.
The destination MAC address can be used by the network to restrict message delivery to selected devices that need to 
receive them, reducing network load. This address also can be used by hardware in receiving devices to filter out 
messages that are of no interest to them, reducing processor burden. Different filtering algorithms are implemented by 
different devices. The standard recommends that the algorithm used by hardware of the receiving device be considered 
when assigning destination multicast addresses.
Subscribers can use this address to discriminate TxGOOSE1 messages from other GOOSE messages.

TxGOOSE1 VLAN PRIORITY

Range: 0, 1, 2, 3, 4, 5, 6, 7, 5-4, 6-4, 6-5, 7-4, 7-5, 7-6
Default: 4

When the value entered is 0, 1, 2, 3, 4, 5, 6, or 7, the User Priority value in the IEEE 802.1Q VLAN tag included in published 
TxGOOSE1 messages is set to that value. When one of the two-digit values is entered, the dynamic priority feature is 
selected: the first event message has the User Priority value of the first digit, and User Priority is decremented in each 
following message until reaching the value of the second digit. For instance, if the selected value is 7-5, then the User 
Priority values in successive messages beginning with the message triggered by an event is 7, 6, 5, 5, 5, 5, 5, and so on. 
Do not make a dynamic priority selection when standard behavior is required.
Network devices can forward a message with a higher priority value before a message with a lower priority value, which 
speeds delivery of high-priority messages in heavily loaded networks. The standard recommends that higher-priority 
messages, such as GOOSE, have priority values in the range of 4 to 7.

TxGOOSE1 VLAN ID

Range: 0 to 4095 in steps of 1
Default: 0

The value entered sets the VID value in the IEEE 802.1Q VLAN tag included in published TxGOOSE1 messages. VID can be 
used by network devices to direct messages to only selected devices, reducing network burden. VID values of 0 and 1 
are assigned by IEEE 802.1Q to other functions and are not to be used for GOOSE.

Содержание F35











































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F35

Samson 430 Series Mounting And Operating Instructions preview
430 Series
Бренд: Samson Страницы: 78
Rachio 3 Get Started preview
3
Бренд: Rachio Страницы: 16
DAB ACTIVE DRIVER M/M 1.1 Programming Manual preview
ACTIVE DRIVER M/M 1.1
Бренд: DAB Страницы: 10
d&b audiotechnik 10D Quick Start Manual preview
10D
Бренд: d&b audiotechnik Страницы: 3
DAB PUMPS ACTIVE DRIVER M/M 1.1 Manual preview
ACTIVE DRIVER M/M 1.1
Бренд: DAB PUMPS Страницы: 38
Fagor CNC 8070 Original Instructions Manual preview
CNC 8070
Бренд: Fagor Страницы: 10
Fagor CNC 8070 Operating Manual preview
CNC 8070
Бренд: Fagor Страницы: 358
Fagor CNC 8070 Programming Manual preview
CNC 8070
Бренд: Fagor Страницы: 556
Fagor CNC 8060 Operating Manual preview
CNC 8060
Бренд: Fagor Страницы: 172
Fagor CNC 8060 Translation Of The Original Manual preview
CNC 8060
Бренд: Fagor Страницы: 180
Fagor CNC 8060 Hardware Configuration preview
CNC 8060
Бренд: Fagor Страницы: 112
FaderMate Master Control Unit Fittings Manual preview
Master Control Unit
Бренд: FaderMate Страницы: 36
H3C S9500E Series Card Manual preview
S9500E Series
Бренд: H3C Страницы: 5
H3C WX1800H series Command Reference Manual preview
WX1800H series
Бренд: H3C Страницы: 27
H3C WX3500H series Installations preview
WX3500H series
Бренд: H3C Страницы: 4
H3C WX5540H Installation Manual preview
WX5540H
Бренд: H3C Страницы: 54
H3C LSWM1WCM10 Manual preview
LSWM1WCM10
Бренд: H3C Страницы: 10
H3C LSQM1WCMB0 Quick Start Manual preview
LSQM1WCMB0
Бренд: H3C Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды