GE ASTAT XL, Руководство пользователя

Страница: 27 / 82

ASTAT XL User Manual Fout! Stijl niet gedefinieerd.
DET-812 27
7 Operation
7.1 The Keypad
Reset
5
1
2
3
4
6
1624
2.
A
Alarm
Exi t
Enter
Menu
Start
Stop
Run
Ready
Logs
Alarm Hand
Status Graph
Auto
Hand
1
Four-line display for status and programming details.
2
HAND/AUTO : Toggle between Hand and Auto control (i.e.
local/remote control mode)
STATUS : Open the status displays and scroll between different
status screens
GRAPH : Open the performance graphs and scroll between different
graph screens
ALARM LOGS : Open the logs
3
Soft starter local control buttons:
START : Start the motor
STOP : Stop the motor
RESET : Reset a trip (Hand mode only).
4
Status LEDs (see below for details)
5
Menu navigation buttons:
EXIT : Exit the menu or parameter, or cancel a parameter change.
ENTER : Enter a menu or parameter, or save a parameter change.
: Scroll to the next or previous menu or parameter, change
the setting of the current parameter or scroll through the status or
graph screens.
6
Remote input LEDs. When on:
INPUT A : Programmable input A is active
START : The remote start input is active
STOP : The remote stop input is active
RESET : The remote reset input is active
7.2 Starter Status LEDs
LED name On Flashing
Ready The motor is stopped and the starter is
ready to start. The motor is stopped and the starter is
waiting for the
Restart Delay (parameter 5A)
or Motor Temperature Check (parameter 4F).
Run The motor is in run state (receiving full
voltage). The motor is starting or stopping.
Alarm The starter has tripped. The starter is in warning state.
Hand The starter is in Local control mode. –
Status The status screens are active. –
Graph The graph screens are active. The graph has been paused.
Alarm Logs The logs menu is open. –
If the starter is in remote control mode, the Hand LED will be off.
If all LEDs are off, the starter is not receiving control voltage.
7.3 Displays
The keypad displays a wide range of performance information about the soft starter. The bottom
half of the screen shows real-time information on current or motor power (as selected in parameter
10J). Use the
STATUS button or and buttons to select the information shown on the top half
of the screen.
•
Starter status
•
Motor temperature
•
Current
•
Motor power
•
Last start information
• Date and time
•
SCR conduction