manualshive.com logo in svg

GE Multilin F650, Инструкция по эксплуатации

GE Multilin F650 - мощный защитный реле, обеспечивающее надежную защиту электрической системы. Для правильной настройки и эксплуатации прибора необходимо скачать Руководство пользователя бесплатно с manualshive.com. Получите подробную информацию об этом продукте, изучив инструкцию внимательно.

Поделиться
Скачать
background image

CHAPTER 7:  IEC 61850 PROTOCOL

7.3 IEC 61850 CONFIGURATOR

GEK-106310-AF

F650 DIGITAL BAY CONTROLLER

7-241

7.3.2.11  Generic substation event services - GSSE AND GOOSE

OVERVIEW

IEC 61850 specifies two types of peer-to-peer data transfer services: Generic Substation State Events (GSSE) and Generic 
Object Oriented Substation Events (GOOSE). GSSE services are compatible with UCA 2.0 GOOSE. IEC 61850 GOOSE services 
provide virtual LAN (VLAN) support, Ethernet priority tagging, and Ethertype Application ID configuration. The support for 
VLANs and priority tagging allows for the optimization of Ethernet network traffic. GOOSE messages can be given a higher 
priority than standard Ethernet traffic, and they can be separated onto specific VLANs. Because of the additional features 
of GOOSE services versus GSSE services, it is recommended that GOOSE be used wherever backwards compatibility with 
GSSE (or UCA 2.0 GOOSE) is not required. 
Devices that transmit GSSE and/or GOOSE messages also function as servers. Each GSSE publisher contains a "GSSE 
control block" to configure and control the transmission. Each GOOSE publisher contains a "GOOSE control block" to 
configure and control the transmission. The transmission is also controlled via device settings. These settings can be seen 
in the ICD and/or SCD files, or in the device configuration software or files. 
IEC 61850 recommends a default priority value of 4 for GOOSE. Ethernet traffic that does not contain a priority tag has a 
default priority of 1. More details are specified in IEC 61850 part 8-1. 
IEC 61850 recommends that the Ethertype Application ID number be configured according to the GOOSE source. In the 
F650, the transmitted GOOSE Application ID number must match the configured receive Application ID number in the 
receiver. A common number may be used for all GOOSE transmitters in a system. More details are specified in IEC 61850 
part 8-1.
In Enervista 650 Setup, select either GSSE or GOOSE messages in 

Setpoint > Inputs/Outputs > Remote Comms

. 

If GSSE is selected then GSSE settings are shown in 

Setpoint > Inputs/Outputs > Remote Comms

 menu. 

If GOOSE is selected then the user should go to main menu and open the IEC 61850 Configurator tool.

GSSE CONFIGURATION

IEC 61850 Generic Substation Status Event (GSSE) communication is compatible with UCA GOOSE communication. GSSE 
messages contain a number of double point status data items. These items are transmitted in two pre-defined data 
structures named DNA and UserSt. Each DNA and UserSt item is referred to as a 'bit pair'. GSSE messages are transmitted 
in response to state changes in any of the data points contained in the message. GSSE messages always contain the same 
number of DNA and UserSt bit pairs. Depending the on the configuration, only some of these bit pairs may have values 
that are of interest to receiving devices.

GOOSE CONFIGURATION

The F650 supports two types of IEC 61850 Generic Object Oriented Substation Event (GOOSE) communication: fixed GOOSE 
and configurable GOOSE. All GOOSE messages contain IEC 61850 data collected into a dataset. It is this dataset that is 
transferred using GOOSE message services. The dataset transferred using the F650 fixed GOOSE is the same data that is 
transferred using the GSSE feature; that is, the DNA and UserSt bit pairs. 

Mapping internal variables to transmitted DNA and UserSt bit pairs is done in Enervista 650 Setup menu 

Setpoint > Relay 

Configuration > Remote Outputs

. The fixed GOOSE dataset always contains the same DNA/UserSt data structure.

Mapping incoming DNA and UserSt bits to Remote Inputs for GSSE is done in 

Setpoint > Inputs/Outputs > Remote 

Comms

.

Mapping of incoming DNA and UserSt bits to Remote Inputs for Fixed GOOSE is done in the IEC 61850 Configurator tool.

Содержание F650























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F650

Farris Engineering 2600 Series General Installation And Maintenance Instructions preview
2600 Series
Бренд: Farris Engineering Страницы: 12
Eastern Times Technology BT-100 Quick Start Manual preview
BT-100
Бренд: Eastern Times Technology Страницы: 4
Vacon 10 Quick Manual preview
10
Бренд: Vacon Страницы: 18
Wasp B2000 Installation Manual preview
B2000
Бренд: Wasp Страницы: 16
Samson 3711 Mounting And Operating Instructions preview
3711
Бренд: Samson Страницы: 20
NEC NEAX 2400 ICS Manual preview
NEAX 2400 ICS
Бренд: NEC Страницы: 149
NEC LED-E012i User Manual preview
LED-E012i
Бренд: NEC Страницы: 13
Panasonic KT2 Communication Instruction Manual preview
KT2
Бренд: Panasonic Страницы: 12
Panasonic CZ-64ESMC1U Operating Instructions Manual preview
CZ-64ESMC1U
Бренд: Panasonic Страницы: 10
Balmar Max Charge MC-624 Installation And Operator'S Manual preview
Max Charge MC-624
Бренд: Balmar Страницы: 8
Balmar MAX CHARGE MC-614 Installation And Operation Manual preview
MAX CHARGE MC-614
Бренд: Balmar Страницы: 20
HABONIM 77 Series Operating Maintenance Installation preview
77 Series
Бренд: HABONIM Страницы: 9
Racal Instruments 1260 Manual preview
1260
Бренд: Racal Instruments Страницы: 94
Racal Instruments 1260 User Manual preview
1260
Бренд: Racal Instruments Страницы: 97
Zamel P-257/2 Quick Manual preview
P-257/2
Бренд: Zamel Страницы: 2
Zamel P-257/2 Quick Start Manual preview
P-257/2
Бренд: Zamel Страницы: 2
Zamel P-257/2 Manual Instruction preview
P-257/2
Бренд: Zamel Страницы: 2
National Instruments NI 9215 Calibration Procedure preview
NI 9215
Бренд: National Instruments Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды