GE Multilin F650, Инструкция по эксплуатации, Страница: 86 / 1046

4-6 F650 DIGITAL BAY CONTROLLER GEK-106310-AF
4.1 ENERVISTA 650 SETUP SOFTWARE CHAPTER 4: INTERFACES, SETTINGS & ACTUAL VALUES
4.1.4 File management menu
File management with EnerVista 650 Setup software:
4.1.4.1 Offline mode
Figure 4-3: Offline mode file management
1
1. “Relay and logic configuration” and “Protection and Control Settings” must be uploaded to the F650 relay or the device
to operate properly
Run EnerVista 650 Setup
Open a *.650 file
(“ File>Open ” menu)
Modify Settings and relay
configuration
Is it necessary to
program
additional logic?
Launch the Logic Configuration tool in EnerVista
650 Setup (“ Setpoint>Logic Configuration ”)
Create new or modify the existing logic:
(“ File>Open Project ”)
Compile and save logic file (*.pep) and drawing
design (*.aut) in Logic Configuration tool
Exit PLC Graphic Editor and save the *.650 file
from the main application menu
Is the relay
completely
configured?
Save *.650 settings & configuration file
Store in the computer the Logic configuration files (*.pep, *.aut, *.lib) as
well as the *.650 for further logic changes.
YES
YES
NO NO