manualshive.com logo in svg

Garland CFA Garland Grill 2.0, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Garland CFA Garland Grill 2.0 Скачать руководство пользователя страница 8

G

eneral Information 

S

ection 1

8  

Document Number:   

G

AR_IOM_

C

FA

B

ROILER_4603091   rev 00   

(

08/21/2017

)

Comparing Major Components on CFA Garland Grill 1.0 and 2.0 

Users who have used 

C

FA 

G

arland 

G

rill 1.0 will find similar

,

 but very different components and accessories/tools on 

G

rill 2.0. 

This section provides an overview on the features and differences between 

G

rills 1.0 and 2.0.

CFA Garland Grill 1.0 (CXBE12)

CFA Garland Grill 2.0 (CXPB12) 

O

v

er

all

Upper Gr

a

te and C

o

wl Assembly

Top grate is secured to the cowl assembly with a latch at front. 
Daily cleaning behind the upper grate is required. 
Heating elements are exposed.

Latch system is not required as an upper cast iron grate is 
sealed to the cowl assembly. The upper grate cannot be 
dropped down or opened by operators for the cleaning of the 
backside of the cook surface.
Heaters are embedded and sealed in the cowl assembly.

One heating element assembly.

New heaters 

(

two identical heaters

,

 front and back

)

.

Different thermocouple locations.

Lifting arm attached to platen at 3 points 

(

two at front

,

 one at 

back

)

.

New lifting arm has also 3 attachment points 

(

two at back

,

 

one at front

)

 plus additional connection to the center of cowl 

assembly.

Level platen at front and back.

Level platen at front and/or rear right.
New inductive sensors for platen leveling.

Upper grates with open groves.

S

olid one piece

,

 specifically profiled cast iron upper grate.

Option: Exhaust Fan.

No exhaust fan option as added smoke deflector at front.

Содержание CFA Garland Grill 2.0

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды