manualshive.com logo in svg

Garland CFA Garland Grill 2.0, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Garland CFA Garland Grill 2.0 Скачать руководство пользователя страница 2

READ THIS MANUAL

n

Warning

Read this manual thoroughly before installing, 
operating, or performing maintenance on the 
equipment. Failure to follow instructions in this manual 
can cause property damage, injury or death.

This manual must always be available for reference at 
the place of operation.

Important 

Do not use this manual for other models that are not 
specified on the front cover of this manual.

SERVICE SUPPORT

Garland CFA Hot-Line: 1-8

00

-

379

-

7278

IMPORTANT: 

Store Number, Location

Model Number: 

CXPB12

Serial Number

Date of Installation

ABOUT THIS MANUAL

Throughout this manual, the appliance model indicated on 
the cover page is referred to as 

appliance

 or

 equipment 

or

 

unit.

A period (.) is used in this manual as the decimal separator.

Original measurements are in imperial. Measurements in 
metrics are provided for reference.

INSPECT THE SHIPMENT

•

Thoroughly inspect the equipment upon delivery.

•

Check packing slip / accessories list to ensure all parts
are delivered.

•

Contact factory immediately if any problem or damages
with the shipment.

KEEP THE PACKING SLIP (IF APPLICABLE)

The packing slip attached to the shipment contains detailed 
information on all components. Keep the packing slip for 
reference.

TEMPORARY STORAGE

Garland provides adequate protection under normal 
conditions in transit and storage. The appliance may need 
additional protection if it is stored near salt water, a tropical 
area, or other unfavorable conditions. Please contact 
Garland immediately if these conditions occur. 

Tip: Put Canola oil on cooking surfaces of upper and lower 
cast iron grates to prevent rusting before transport.

SHIPPING DAMAGE CLAIM PROCEDURE

Please note that the Garland equipment was carefully 
inspected and packed by skilled personnel before leaving 
the factory. The transportation company assumes full 
responsibility for safe delivery upon acceptance of the 
equipment. What to do if the equipment arrives damaged:

1. File a claim immediately regardless of the extent of

damage.

2. Be sure to note, “visible loss or damage,” on the freight

bill or express receipt and have the person making the
delivery sign it.

3. Concealed loss or damage: if damage is unnoticed until

the equipment is unpacked, notify the freight company
immediately, and file a concealed damage claim.

Содержание CFA Garland Grill 2.0

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды