manualshive.com logo in svg

Garland CFA Garland Grill 2.0, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Garland CFA Garland Grill 2.0 Скачать руководство пользователя страница 49

Document Number:   GAR_IOM_CFABROILER_4603091   rev 00   (08/21/2017) 

49

Notice

For Service Suport, Call

Garland CFA Hot-Line: 1-8

00

-

379

-

7278

Store owners and employees are prohibited to 
perform any service operations on the appliance. 

When Problem Occurs

•

Use the table below to record the details of the
problem, error message, and the situation.

•

This information is valuable to technician and
manufacturer for solving the problem.

Problem occurred on DATE:

TIME:

AM / PM

DISPL

A

Y

Error Code? ___________________________________

Error message on display:

No error message or errors shown................................ 

SITU

A

TION

Describe the situation under which the malfunction 
occurs. 

Did same or similar problem occur before.

YES 

    NO 

If YES, frequency?

• Just 

once................................

•

Occasionally..........................

•

Repeatedly.............................

State of the grill? The problem occurs:

•

After switching on the grill
(before cooking, before pre-heating)..........

•

When the grill was cooking
...................................................................................

•

When the grill was pre-heating
...................................................................................

•

Other. Please describe:

Error Messages On Display

When problem occurs, the display may show an error code 
and on-screen instructions. 

•

User has to discard any laid product and call for service
immediately. Grill is locked and not functional. (below,
an example)

•

User has to discard any laid product, acknowledge the
error and return to HOME screen. It is important to call
service if problem continues. (below, an example)

•

User has to wait. (below, an example)

 Section  5

 Troubleshooting 

Содержание CFA Garland Grill 2.0

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды