manualshive.com logo in svg

Garland CFA Garland Grill 2.0, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Garland CFA Garland Grill 2.0 Скачать руководство пользователя страница 12

12  

Document Number:   GAR_IOM_CFABROILER_4603091   rev 00   (08/21/2017)

Installation 

Section 2

Removing Equipment from Wood Crate

n

WARNING

Follow the instructions below to safely and easily remove 
unit from skid. Unit is very heavy! Use Personal Protective 
Equipment (PPE).

Tools required.

1. Packaging has a

top cardboard box
and a wood skid.

2. Cut the straps

and remove the
cardboard box
covering the unit.

3. Remove 

and

discard the two
(2) wood blocks
locking each front
caster.

,

CAUTION 

ENSURE FRONT 
CASTER BRAKES ARE 
ON while removing 
blocks. 

4. Release the front caster brakes and push unit forward

off of the skid. Carefully move and guide the unit to
roll straight ahead.

,

CAUTION

Clear the work area and pathway of all packaging 
waste before moving the equipment.

,

CAUTION

MOVE GRILL 

USING THE SIDE HANDLES.

DO NOT MOVE GRILL 

USING THE SCREEN GUARD.

DO NOT MOVE GRILL 

USING THE PLATEN OR ARM.

DO NOT MOVE GRILL 

USING THE CONDUIT.

Содержание CFA Garland Grill 2.0

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды