manualshive.com logo in svg

Garland CFA Garland Grill 2.0, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Garland CFA Garland Grill 2.0 Скачать руководство пользователя страница 11

Document Number:   GAR_IOM_CFABROILER_4603091   rev 00   (08/21/2017) 

11

 Section  2

 Installation

 DANGER

,

 

Installation, adjustments, start-up procedure and 
function test of the appliance must be performed by 
the manufacturer’s service partners (Factory Authorized 
Service Agencies), following all applicable national and 
local codes, and health and safety regulations.

Specifications

RATING PLATE LOCATION

The rating plate is affixed to 
the lower front of the right 
exterior body side panel.

ELECTRICAL SPECIFICATIONS, MODEL: CXPB12 (USA/CANADA, 208V AND 220V)

Voltage

200V

208V

220V

230V

240V

Current L1 (A)

23.2

24.1

23.2

23.4

22.5

Current L2 (A)

27.1

28.2

26.6

26.5

24.9

Current L3 (A)

22.2

23.1

22.0

22.0

20.9

Total Power(kW)

8.3

9.0

8.8

9.2

9.0

NOTE: Wiring diagram is supplied with each unit.

Cable and Plug: 

Provided with each unit, a 5-foot (1.5m) long power supply cord with an integral (NEMA 15-50P) plug.

CLEARANCE REQUIREMENTS

Minimum Clearance to Non-Combustible Walls / Floor

Minimum Clearance to Combustible Walls / Floor

(See Safety Warning Statement below)

Sides

Rear

Sides

Rear

0” 

0” 

NOT ALLOWED

NOT ALLOWED

,

CAUTION

TO REDUCE THE RISK OF FIRE, THE APPLIANCE IS TO BE INSTALLED IN NON-COMBUSTIBLE SURROUNDINGS ONLY

, 

with no combustible material within 18” (457 mm) of the sides, front, or rear of the appliance or within 40” (1 m) above 
the appliance. The appliance is to be mounted on floors of noncombustible construction with noncombustible flooring 
and surface finish and with no combustible material against the underside, or on noncombustible slabs or arches have no 
combustible material against the underside. Such construction shall in all cases extend not less than 12” (305 mm) beyond 
the equipment on all sides.

Содержание CFA Garland Grill 2.0

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды