Garland CFA Garland Grill 2.0, Инструкция по установке, эксплуатации и обслуживанию

Страница: 47 / 56

Document Number: GAR_IOM_CFABROILER_4603091 rev 00 (08/21/2017) 47
Section 4 Cleaning & Maintenance
Backsplash Surface of Grill
• Wipe the backsplash area with a clean, sanitized towel.
For stubborn build-up, spray super contact cleaner on a
damp, clean, sanitized towel to clean.
Metal Edges around Upper and Lower Grates
• Use super contact cleaner on a clean, sanitized towel to
clean thoroughly.
• NOTE: DO NOT get super contact cleaner on grill
grates.
Exterior Metal Surfaces
• Use super contact cleaner on a damp, clean, sanitized
towel to clean thoroughly.
Platen Sensors and Sensor Targets
• The sensors on the platen arm measures and validate
the leveling of the platen. Grease or carbon build-up on
the sensors and targets will prevent the sensors from
sensing the targets on the platen top properly. Errors
might occur when the sensors cannot read the targets.
• To clean, insert a clean damp towel in between the
sensor and target. Then move the towel back and forth
to wipe the underside of the sensor and top of the
target.
• NOTE: DO NOT USE CHEMICALS.
Display Screen and Screen Guard
• Use degreaser on a damp, clean, sanitized towel to clean
thoroughly.
Upper Platen Seam
• Keeping the seam clean reduces chances of grease
ingress into the sealed area. Do not neglect the rear area
of the platen.
• Use degreaser on a damp, clean, sanitized towel to clean
thoroughly. Then sanitize the same area.