Garland CFA Garland Grill 2.0 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 56

Garland CFA Garland Grill 2.0 Скачать руководство пользователя страница 15

Document Number: GAR_IOM_CFABROILER_4603091 rev 00 (08/21/2017)

15

Section 2

Installation

APPLIANCES EQUIPPED WITH CASTERS

The appliance is shipped with casters installed. Some
adjustment might be required to level the unit.

The front and rear casters are adjustable, only the front
casters have brakes.

To restrict the mobility of the appliance, use current method
of restraining per the requirement at location.

REMOVING DOCKING STATION

If location has a docking station for CXBE12 (or Grill 1.0/
Gen1), remove all the components of the docking station
before installing the new grill.

New grill’s back casters are further back on the unit than the
current grill. If installed on the existing docking station, the
back of the grill would be too close to the wall.

To remove the docking station:

1. Unplug and remove current grill from the docking

station.

2. Lift up and remove the top cover.

3. Remove the bolts securing the bottom panel and then

remove the bottom panel.

4. Ask the Store Manager to keep all docking station

components in a safe place.

«
...
13
14
15
16
17
...
»

Содержание CFA Garland Grill 2.0

























































Отзывы:

Нет отзывов