GENERA
L
9
PULSE Installation, Commissioning and Servicing Manual - Revision 19
No naked flames.
Isolate fuel supplies and empty pipes before working on them.
Isolate electrical supply before opening a dispenser cabinet for maintenance. Physically
lock, restrict access to, or tag the circuit breakers you turn off when working on a
dispenser.
The dispenser must be supported at all times by all anchor bolts as shown in the
appropriate footprint diagram (see “Gallagher PULSE Series - Footprint Manual.” Part
No. 2A02068). External support must be used until these are secured. In service, all
anchor bolts must be fitted.
All personnel working with dispensers must be made aware of how, in an emergency, to
turn OFF power to the dispenser and any remote fuel storage system. They must also be
briefed on fire fighting and other relevant inflammable liquid safety procedures.
There are exposed belt-drives between mechanical pumps and their motors in fuel pump
equipped dispensers. Ensure that power to the motors is isolated and that the motors
have stopped running before opening external panels.
Have all leaks or defects repaired immediately.
Fuels present a toxic hazard and suitable precautions should be taken at all times to
prevent ingestion, inhalation and contact with skin and eyes.
Only lift units using the correct lifting points as indicated in the installation part of
this manual. Never lift by the nozzle boot, sheet metal, etc. Incorrect lifting also risks
damage to equipment which will not be covered under warranty.
Any repairs must not compromise the safety approval of a dispenser.
The system must not be modified without consulting Gallagher.
Only use genuine spare parts. PULSE dispensers are supplied by Gallagher as a fully
approved system. Genuine parts as specified in the original design are integral to the
correct function and safety of the system. Gallagher cannot be held responsible for
any consequences of using non-genuine parts and will not support under warranty any
PULSE where substitution has occurred. Any replacement parts should be like for like.
In addition the repairer may be legally liable for the consequences of any unauthorised
modifications.
Never operate a non-intrinsically safe circuit without the flameproof enclosure cover
fitted.
Do not short out isolation or intrinsic safety barriers.
4.1 Hazard Warnings
4
SAFETY WARNINGS & PRECAUTIONS
Risk of explosion
Electric Shock Hazard
Toxic Hazard
