SER
VICING
78
PULSE Installation, Commissioning and Servicing Manual - Revision 19
12.11 5/6 Digit Mode - 5DIGIT
When set to 6 Digit mode, a dispenser will allow sales up to a maximum of
$9990.00
. The
5 Digit mode allows sales up to a maximum of
$990.00
. The dispenser must be set to the
same mode as the POS system, some of which are only capable of operating in 5 Digit
mode.
The Dollars display shows
5DIGIT
and the Litres display
FP(X) 0
(or
1
) where (
X)
represents
the Fuel Point number.
Pressing
5
toggles the
0
or
1
following the Fuel Point number
in the Litres display, indicating that the selected Fuel Point is
set to 5 Digit mode (
1
) or 6 Digit mode (
0
).
Each fuel point (side) must be set. After making this
change, the dispenser must be repowered. The 5/6
digit setting will only change when a fuelpoint is POS
enabled (POS = 1). If the fuelpoint is in standalone
mode the dispenser will revert to the previous 5/6 digit
setting for that fuelpoint.
Fuel Point 3
set to 6-Digits
$
L
12.9 Setting Hoses Active/Inactive - HOSE
Newly delivered dispenser’s have hoses set as active before leaving the factory.
To set hoses active/inactive enter the service mode.
Scroll to the screen shown where
H1
indicates the hose number
followed by
1
for active or
0
for inactive.
Pressing the
6
key will move between hoses and pressing
5
will
toggle between active and inactive.
Hoses are set as active/inactive at the local fuel point found on the
User Interface on the side of the hose to be set.
$
L
Showing Hose 1
as active
12.10 Grade Priority - PRIORTY
If required, the FDS grade priority order can be mapped to match the
order of the data from the POS.
The FDS leaves the factory with the default grade priority order
1234.
The Dollars display shows
PRIORTY
and the Litres display shows the
grade priority order (1234 by default).
Press
F
to edit the grade priority order, an asterisk will appear next
to PRIORTY to indicate that the function is in edit mode. Use the
number keys to enter the correct grade priority order and press
F
to
save or
to cancel.
$
L
$
L
Version 1.11
