Gallagher PULSE Series, Руководство по установке

Страница: 95 / 136

SER
VICING
95
PULSE Installation, Commissioning and Servicing Manual - Revision 19
15.10 PULSE Counted Error Codes
Name Brief Meaning Type Troubleshooting
1 FLUID The float switch has been
activated
Hard Check sump for fluid. Check fluid
switch operation and connections
2 POS Lost connection with POS
during delivery
Soft Check POS/Forecourt controller
loop connection and operation
3 STACK Stack failed to start delivery Soft Replace stack controller. Check
encoder
4 OVERRUN Pre-set delivery amount has
been exceeded
Soft Check for leaking valves
5 LPG MTR LPG meter communication
error
Soft Check cable to meter, check
meter has power, etc
6 SECURITY LPG meter security error Soft Check the security dip switch in
the LPG meter and switch to the
secure position
7 ENCODER Reverse or unusual fuel
movement detected
Soft but after three triggers per
hose a Hard error occurs and on
subsequent restart the affected
hose is disabled
Check encoder, cables, mux,
stack. Check for leaks and leaking
valves
8 XS FLOW Excess LPG flow detected Soft Check for leaks in LPG system.
May also occur when filling
empty tanks
9 RUN ON Fuel movement detected
after nozzle hung up
Soft Check for valve not closing.
Check encoder operation for false
counting. Check for fuel leaks.
Check nozzle switch operation
10 LPG COMS LPG communication error Soft Check cable to meter, check
meter has power, etc
11 RATIO Blended delivery outside
acceptable parameters
Soft but after three triggers per
hose a Hard error occurs and on
subsequent restart the affected
hose is disabled
Check for large pressure differ -
entials caused by clogged filters.
Test fuel pathways for unusual
flow rates in stack test
12 MUX MUX communication inter -
rupted
Logged Check cable to multiplex board
and the barrier board, check mul-
tiplex board and barriers board
have power, etc
Version 1.20
Key:
Type
Logged = Recorded in the log file only.
Soft = Stops the current delivery on the affected Fuelpoint. These require a nozzle
on the affected Fuelpoint to be hung up twice to clear.
Hard = Stops all deliveries on the pump. This requires a repower to clear.